Calcium cyanide | Ca(CN)2 - PubChem

P021; As stipulated in 40 CFR 261.33, when calcium cyanide, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to federal and/or state hazardous waste regulations.

Chat Online

Ceramic Ferrules: One & Two Piece | Blasch Precision Ceramics

Ceramic Ferrules: One & Two Piece Blasch ceramic ferrules provide more effective waste heat boiler tube protection and allow for much greater design flexibility than traditional refractory systems. This is accomplished through the separation of the structural and insulating functions of the ferrules.

Chat Online

Calcium Carbide for Acetylene Production - Rexarc Blog

Calcium carbide drums shall only be opened at the time of filling carbide to hoppers. Carbide with more than 15% dust concentration shouldn't be charged in the generator. The carbide-water residue should not be discharged into the environment directly. Best Sizes for Gas Yield of Calcium Carbide. The size of the calcium carbide is an

Chat Online

Rieco Industries - Dense & Dilute Phase Conveying

If you are looking for dilute lean phase manufacturer in India. Contact 020-25535384 today or visit our website for more info.

Chat Online

Sustainability - CalciTech Europe - Specialty Calcium

This material is a waste by-product composed of impure calcium hydroxide that arises from the production of acetylene gas through the reaction of calcium carbide (CaC 2) with water. The calcium carbide is produced by heating coke and low quality quicklime to very high temperature in an electric arc furnace.

Chat Online

CO2 emissions in calcium carbide industry: An analysis of

Calcium carbide is made by heating calcium carbonate and subsequently reducing CaO with carbon (e.g. petrol coke), according to the follow reaction: (1) CaCO 3 → CaO + CO 2 (2) CaO + 3C → CaC 2 + CO (CO + O 2 → CO 2) The process for manufacturing calcium carbide is illustrated in Fig. 3.Limestone is converted to lime in a limekiln, while moisture is removed from coke in a coke dryer.

Chat Online

54-22120-01 - Rheem 54-22120-01 - Calcium Carbonate Refill

Rheem 54-22120-01 - Calcium Carbonate Refill Bag (For RXGY-A01) - Calcium Carbonate Refill Bag (For RXGY-A01)

Chat Online

Guides to Pollution Prevention: Metal Casting and Heat

Improve Process Control In an attempt to reduce calcium carbide usage, and hence waste production, improved process controls are being developed that use different ways of introducing 20 surface heating and heat treating are possible. In contrast, by allowing sufficient time for heat conduction, relatively uniform heating pat- terns can be

Chat Online

CDM: SA Calcium Carbide Furnace Waste Gas to Electricity

Project title SA Calcium Carbide Furnace Waste Gas to Electricity CDM Project - project design document (1604 KB) PDD appendices Appendix 1 - 8928 GEF Calculation (1511 KB) Appendix 2 - 8928 CER Calculation (130 KB)

Chat Online

Statement of Basis - LouisvilleKy.gov

furnace to produce calcium carbide. The calcium carbide is then processed and packaged for sale. Waste material is reacted on-site to produce acetylene gas which is burned in a flare. The calcium hydroxide residue from acetylene production is stored in large open pits on the site. 3.

Chat Online

SubCom® Liquid Heating Solutions - Inproheat Industries

SubCom®'s robust heat transfer capabilities has taken on the toughest operating conditions and set a new standard for direct contact liquid heating solutions. Low emissions burners, reduced maintenance costs, durable construction and short payback periods that lead to unparalleled efficiency approaching 100%.

Chat Online

PDF Effect of Calcium Carbide Waste Powder on Some Engineering

searches are still being conducted on use of CalciumCarbide Waste in construc- tion. CaO S O H O C S H+− +−→ i2 2 (2) (Calcium Carbide Waste Powder) + (Bamboo Leaf Ash)Calcium Silicate Hydrate. From Equation (2), it is observed that calcium carbide waste contains some cement chemical composition. Research findings have indicated that Calcium

Chat Online

SULFUR, MOLTEN | CAMEO Chemicals | NOAA

Combinations of finely divided sulfur with finely divided bromates, chlorates, or iodates of barium, calcium, magnesium, potassium, sodium, or zinc can explode with heat, friction, percussion, and sometimes light [Mellor 2 Supp.1:763. 1956]. A mixture with barium carbide heated to 150°C becomes incandescent.

Chat Online

PDF Mechanical Properties and Durability of Calcium Carbide

Furthermore, waste disposal are now taxable by most governments [14]. Calcium carbide is usually used in producing acetylene gas, fruits ripening agents and desulfurizing iron. The calcium carbide (CaC 2) is a chemical compound produced from coal (C) and calcined limestone (CaCO 3). The kiln uses electric furnace to heat the coal and

Chat Online

Physicochemical Characterizations and Desulfurization

CO2 capture and preparation of spindle-like CaCO3 crystals for papermaking using calcium carbide residue waste via an atomizing approach. Korean Journal of Chemical Engineering 2019, 36 (9) , 1432-1440. DOI: 10.1007/s11814-019-0336-5. Sandeep K. Jena, Nilima Dash, Swagat S. Rath.

Chat Online

CA2730754C - Method and system for producing calcium

Provided are a method and a system for producing calcium carbide. The method comprises mixing powdery carbon-containing raw material with powdery calcium-containing raw material; directly heating the mixture by combusting a part of carbon-containing raw material in an oxygen-containing atmosphere to produce calcium carbide. The carbon-containing raw material can be coal, semi-coke or coke, the

Chat Online

Steam boiler Types-ZBG

Application:chemical industries, building materials, non-ferrous metallurgy, steel industries and other industries which produce a large amount of waste heat. Heat sources:waste heat of dry quenching,Cement kiln, coking , calcium carbide furnace, glass kiln, carbon kiln, sulfuric acid, "three wastes" mixed combustion, etc

Chat Online

Small Acetylene Generator, Low Pressure Acetylene Gas

Calcium carbide is first beaten into a powder in a pulverizer before it is reacted with water. Now, the powdered calcium is added through a gas tight hopper valve arrangement to the acetylene gas generator which has sufficient amount of water to discharge lime slurry made of 85 % to 90 % water.

Chat Online

Light Your Trail With a Carbide Lamp | MOTHER EARTH NEWS

The carbide lamp in action! These devices offer efficient, carry-along lighting for all kinds of outdoor activities. Mixing water with calcium carbide crystals inside the burner produces acetylene

Chat Online

Solved: Thermochemistry - Problems Set #2 1. CaC2, Calcium

Thermochemistry - Problems Set #2 1. CaC2, calcium carbide, can be made by heating calcium oxide with carbon (charcoal). CaO(s) + 3C (s) → CaC2 (s) + CO(g) How much hcat in joules, is absorbed in a reaction in which 2.79 mol C (s) is consumed HP = +464.8 kJ under these conditions?

Chat Online

Carbides and Carbide Materials (hardmetals) Specifications

Carbides / Carbide Ceramic Type Your choices are Boron Carbide : Boron carbide (B 4 C) has higher hardness than alumina or silicon carbide. Its oxidation product (B 2 O 3) provides a protective skin at high temperatures (> 800 o C). Because of its high hardness and wear resistance, boron carbide is applied in low-temperature applications such as grinding wheel dressers, and abrasive blast

Chat Online

PDF MATERIAL SAFETY DATA SHEET - Atlantic Supply

Calcium Carbide None Established 75-20-7 65-85 Calcium Oxide 5 mg/m3 2 mg/m3 1305-78-8 10-30 NOTE; NO EXPOSURE LEVELS EXIST FOR CALCIUM CARBIDE. and liberating heat. 5) Appearance and Odor: Gray to bluish black. Odor on exposure to air resembles garlic. Waste Disposal Methods (Always Consult Federal, State, Regional, and Local

Chat Online

Corundum Cement Silicon Carbide Castable

Calcium Silicate Board READ MORE. Rock Wool Sandwich Board READ MORE. Corundum Cement Silicon Carbide Castable. Silicon Carbide Castable Rongsheng Refractory. Silicon carbide castables are made of silicon carbide with anti-wear, waste heat boiler first passage, cement kiln decomposition furnace, rotary kiln kiln head,

Chat Online

Calcium carbide - Wikipedia

Calcium carbide, also known as calcium acetylide, is a chemical compound with the chemical formula of Ca C 2.Its main use industrially is in the production of acetylene and calcium cyanamide.. The pure material is colorless, however pieces of technical-grade calcium carbide are grey or brown and consist of about 80-85% of CaC 2 (the rest is CaO (calcium oxide), Ca 3 P 2 (calcium phosphide

Chat Online

Donald Bangui - SHIFT SUPERVISOR, MECHANICAL ENGINEERING

View Donald Bangui's profile on LinkedIn, the world's largest professional community. WASTE HEAT RECOVERY BOILER ACETYLENE GAS IS PRODUCED BY EXOTHERMIC REACTION OF CALCIUM CARBIDE WITH

Chat Online

China's Venerable Vinyl Process | January 18, 2010 Issue

The calcium carbide route used in China involves heating lime and coal-derived coke in an electric furnace at a temperature of 2,000 °C to obtain calcium carbide. Acetylene is generated by the

Chat Online

PDF CALCIUM CARBIDE CCB - CAMEO Chemicals

8.8 RCRA Waste Number: 8.9 EPA FWPCA List: Yes 9. PHYSICAL & CHEMICAL CALCIUM CARBIDE CCB 9.20 SATURATED LIQUID DENSITY Temperature (degrees F) Pounds per cubic foot N O T P E R T I N E N T 9.21 LIQUID HEAT CAPACITY Temperature (degrees F) British thermal unit per pound-F N O T P E R T I N E N T 9.22 LIQUID THERMAL CONDUCTIVITY Temperature

Chat Online

UN 1402: Calcium carbide - Substance information - HazMat Tool

Calcium carbide. Calcium carbide, also known as calcium acetylide, is a chemical compound with the chemical formula of CaC2. Its main use industrially is in the production of acetylene and calcium cyanamide.The pure material is colorless, however pieces of technical-grade calcium carbide are grey or brown and consist of about 80-85% of CaC2 (the rest is CaO (calcium oxide), Ca3P2 (calcium

Chat Online

Sinocalci India Private Limited

Flash calcinator has been developed by Sinocalci Corporation to achieve maximum utilization of waste carbonates from Metallurgical and Chemical Industries (paper, calcium carbide etc). The materials exchange heat with flue gases by means of non-contact heating system. the waste carbonates convert to active lime after absorbing heat and

Chat Online

CiteSeerX — NOSB TAP Review Compiled by OMRI Calcium

A high calcium hydrate is 71-74 % calcium oxide, with 0.5-2 % magnesium oxide and 24-25 % water. Slaked lime may also be produced as a waste product. Carbide lime is a waste lime hydrate by-product from the generation of acetylene from calcium carbide, and occurs as a wet powder or dry powder of varying purity (Kirk-Othmer 1991b). Specific Uses:

Chat Online

Development Document for Interim Final Effluent

The proposed categories are: I - Covered Calcium Carbide Electric Furnaces With Wet Air Pollution Control Devices; and II - Other Calcium Carbide Electric Furnaces In developing the above categorization, the following factors were considered as a possible basis: 1) Production Processes 2) Furnace Types a) Open b) Covered 3) Raw Materials 4

Chat Online

PDF Material Safety Data Sheet Page 1 of 2 Calcium Carbide

Calcium Carbide, (75-20-7), 65-85%. Calcium Oxide, (1305-78-8), 10-30%. Section 4: First Aid Measures Always seek professional medical attention after first aid measures are provided. Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.

Chat Online

Patents by Inventor Ealious D. Bell - Justia

Abstract: A calcium carbide based power system for stationary and mobile power plants. The carbide is reacted with water to create heat and acetylene, with the acetylene then being burned to heat a boiler for providing steam to a steam expander.

Chat Online

Calculation of Forming Heat of Cement Clinker Made from

heat of cement clinker made from calcium carbide slag. Introduction If part of active calcium waste, such as carbide slag and high calcium fly ash, is used to replace natural raw materials, it can reduce the consumption of coal and natural limestone, on the other hand,

Chat Online

PDF Producing carbide using plastic waste - BINE

Producing carbide using plastic waste A new process begins normal operation Carbide is an important base material for production of fertilisers, manufacturing raw iron und in other products for the chemical industry. A chemical company from Southern Germany has developed a new process which allows plastic waste to be used to produce carbide.

Chat Online

The potential of FBC fly ashes to reduce CO 2 emissions

According to estimates from 2013, the amount of CO 2 that can be disposed of using a mixture of fly ashes and solid waste from calcium flue gas desulfurization ‒ FBC fly ashes, assuming the use

Chat Online

PDF Lime: Calcium Oxide

Calcium oxide is a white crystalline solid with a melting point of 2572̊C. It is manufactured by heating limestone, coral, sea shells, or chalk, which are mainly CaCO. 3, to drive off carbon dioxide. CaCO. 3 (s) 500-600̊C. CaO(s) + CO. 2 (g) This reaction is reversible; calcium oxide will react with carbon dioxide to form calcium carbonate. The

Chat Online

Non-ferrous Smelting Waste Heat Boiler(WHR) - oil fired

Non-ferrous metallurgy industry: carbon kiln waste heat boilers, submerged arc furnace industry waste heat boiler, calcium carbide furnace waste heat boiler, lead smelting waste heat boiler, . 2.what is the capacity per hour do you need? EPA-600/2-80-159 June 1980 OVERVIEW OF FOREIGN NONFERROUS ..

Chat Online

China Manufacture Supply Calcium Carbide in 100kg 50kg

(2) The powdery calcium carbide heating with nitrogen, reaction products. It cyanogen ammoniation, namely lime nitrogen, calcium lime n and salt reaction heat generated cyanogen melt used for mining gold and non-ferrous metal industry. (3) Calcium carbide itself can be used in the steel industry desulfurizer.

Chat Online

NuFlux ladle slag treatment - Nupro Corporation

NuFlux is a blended calcium carbide based ladle slag modifier that reduces the FeO and MnO content of your ladle slag affordably and with the added benefit of steel quality improvement. As a result of using this product, alloy recoveries are higher, less lime and flux are required, steel cleanliness and inclusion modification are enhanced and

Chat Online